Quote:
Originally Posted by bbrust
Thanks Kube. On the cowl, there are two horizontal cage bolts. I bolted the fender to the rear hole but I don't see a use for the forward hole. If I bolt the lower rear corner as you stated and then mount the fender to the inner fender and cowl, the bottom of the doors will open into the fender. I think I have a few alignment problems. between the body and frame.
The inner fenders came off of the original fenders but the outer fenders are NOS that I bought many years ago and match the originals.
|
Gosh, My old memory may not be as good as it needs to be. If I am correct in understanding your post, the forward hole supports the inner fender brace.
I've attached a photo that I am hoping will match what you have.
Perhaps with this, you and I can narrow down exactly our mutual understanding and get this fixed for ya.