The Ford Barn - View Single Post

George/Maine · 02-26-2014, 04:32 PM

You have 12 volts and should spin fast enough.
I would go with a 12 volt selinode 2 post the ign post run direct to coil.
Ford used that fix for years.

02-26-2014, 04:32 PM	#20
George/Maine Senior Member Join Date: May 2010 Location: Mid coast Maine Posts: 1,878	Re: Flathead hard start when hot You have 12 volts and should spin fast enough. I would go with a 12 volt selinode 2 post the ign post run direct to coil. Ford used that fix for years.