View Single Post
Old 03-19-2013, 07:40 AM   #4
Juergen
Senior Member
 
Join Date: May 2010
Posts: 372
Default Re: Broken rear brake adjuster

Doesn't your pickup have an open drive? If so it has a different backing plate than a car. The emergency cable is sheathed so it doesn't use the conduits like a passenger car but the cable connection like a mechanical 37-38 setup.

If you can't find another correct backing plate, you can repair your old one, particularly if the "bolt" just broke off of the backing plate. I have replace a broken adjustor fwith another bolt and spring by clamping the coil spring and bolt into the backing plate and welding the bolt into the slotted hole.
Juergen is offline   Reply With Quote