Thread
:
Fuel Bowl Question
View Single Post
08-08-2020, 08:42 AM
#
7
Badpuppy
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
Re: Fuel Bowl Question
Flare fittings seal between the mating flare joints. No sealant should be required, as Jim says. As long as the threads are good and surfaces smooth you should be able to pull in a good seal.
Badpuppy
View Public Profile
Send a private message to Badpuppy
Find More Posts by Badpuppy