The Ford Barn - View Single Post

Capsacto · 06-23-2017, 06:32 PM

The TO bearing in my 37 recently seized. Since the trans was out I checked the gears because it was crunching during downshifting. Gave Mac VanPelt a call and bought a 39 gear set, a NOS Ford pressure plate, rebuilt clutch, new oillite pilot bushing and a Federal Mogul-Mex TO bearing. Mac sells quality parts at a reasonable price along with great service. I trust Mac, but only time will tell how long that TO bearing will last. I do not want to change it again.

06-23-2017, 06:32 PM	#5
Capsacto Member Join Date: Sep 2015 Location: NorCal Posts: 68	Re: Throwout bearing choice The TO bearing in my 37 recently seized. Since the trans was out I checked the gears because it was crunching during downshifting. Gave Mac VanPelt a call and bought a 39 gear set, a NOS Ford pressure plate, rebuilt clutch, new oillite pilot bushing and a Federal Mogul-Mex TO bearing. Mac sells quality parts at a reasonable price along with great service. I trust Mac, but only time will tell how long that TO bearing will last. I do not want to change it again. __________________ Ed "I find that the harder I work, the more luck I seem to have." - Thomas Jefferson Last edited by Capsacto; 06-23-2017 at 09:09 PM. Reason: Spelling