The Ford Barn - View Single Post

Dave H · 09-10-2020, 08:49 AM

This section is with no front horns and goes from the uncracked front cross member just past the middle one. It is rusty but solid and would make a good engine test stand or frame for a trailer, brackets for which I will throw in if wanted. I think it may have been a frame used on a Gordon-Smith air compressor. If you need just a cross member I could cut that off for you too. Local pickup only.
Dave

09-10-2020, 08:49 AM	#1
Dave H Senior Member Join Date: May 2010 Posts: 333	Front half of frame City: Vienna State: Virginia Price: $50 This section is with no front horns and goes from the uncracked front cross member just past the middle one. It is rusty but solid and would make a good engine test stand or frame for a trailer, brackets for which I will throw in if wanted. I think it may have been a frame used on a Gordon-Smith air compressor. If you need just a cross member I could cut that off for you too. Local pickup only. Dave Last edited by Dave H; 09-10-2020 at 09:02 AM.