The Ford Barn - View Single Post - Cannot Get Rebuilt Ignition Cable to Read 6 Volts on the Points

The Master Cylinder · 05-10-2020, 08:16 PM

Sounds to me like the wire from the lower plate is broken/disconnected from the upper plate/points. Pull the upper plate and check the wire.

OR

You have a wireless piece o' junk lower plate that is not making contact to the points.

05-10-2020, 08:16 PM	#14
The Master Cylinder Senior Member Join Date: Aug 2012 Posts: 887	Re: Cannot Get Rebuilt Ignition Cable to Read 6 Volts on the Points Sounds to me like the wire from the lower plate is broken/disconnected from the upper plate/points. Pull the upper plate and check the wire. OR You have a wireless piece o' junk lower plate that is not making contact to the points. __________________ The Master Cylinder Enjoying life at the beach in SoCal...