The Ford Barn - View Single Post - Model A motor froze-up

Purdy Swoft · 12-30-2013, 10:57 PM

Don't forget to use penetrant on the valves and lifters. A stuck valve or lifter will only allow the engine to turn so far. When the cam lobe reaches the stuck lifter it will quit turning. Good luck you are well on the way.

12-30-2013, 10:57 PM	#217
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: Model A motor froze-up Don't forget to use penetrant on the valves and lifters. A stuck valve or lifter will only allow the engine to turn so far. When the cam lobe reaches the stuck lifter it will quit turning. Good luck you are well on the way.