The Ford Barn - View Single Post - Installing glove box and door in 1940 Ford coup

deuce_roadster · 03-09-2017, 12:47 PM

The clips punch into the cardboard and give the screws something to bite into instead of cardboard. There should be little marks showing where to place them. I use a block of wood and a small hammer to install them. If there are no locating marks, put the box in the dash and mark where the screws should go and proceed from there.

03-09-2017, 12:47 PM	#12
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,800	Re: Installing glove box and door in 1940 Ford coup The clips punch into the cardboard and give the screws something to bite into instead of cardboard. There should be little marks showing where to place them. I use a block of wood and a small hammer to install them. If there are no locating marks, put the box in the dash and mark where the screws should go and proceed from there.