Quote:
Originally Posted by twostickmutt
i'm trying to get a doodle bug running. there is no cable / wire running to the distributor. i want to run a wire from the coil to the distributor and would like to know where to hook the wire to the distributor. there is still the wire in side of the dist. was wondering if i can splice into that. thanks for any advice.
|
I would order the emergency bypass cable the dealers sell. If you need something right away then I have used a nail and cork. Push the nail through the center of the cork, then screw the cork into the thread until the nail touches the bus bar. Now you can clip a wire from the nail to the coil, or switch.