Thread: Zenith Rebuilding
View Single Post
Old 04-21-2021, 04:28 PM   #7
Rob Doe
Senior Member
 
Join Date: Apr 2021
Location: Central Illinois
Posts: 496
Default Re: Zenith Rebuilding
Quote:
Originally Posted by Rob Doe View Post
Guys, I have a fine point question regarding the reassembly of the Zenith. The secondary well in mine screws in until there are two or three threads showing above the brass well. I believe it is bottoming on the casting. Is this correct?



And the threads are sort of loose too. Is this correct also?
__________________
"It ain't what you know for certain that gets ya in trouble. It's what ya know for certain that just ain't so!"
Rob Doe is offline   Reply With Quote