Sponsored Links (Register now to hide all advertisements)
FYI I have a cam that Schnieder cams did a regrind on for me many years ago. Here are the specs that came with it. Interestingly enough I had lost the original cam card and emailed them one Sat. night at about 11PM to see if I could get the info again. I got an email back from Jerry in 10 minutes asking for the number stamped on the end of the cam and informing me the cam was done in 2001! How is that for customer service!!
.355 lift
260-F
260- Duration
[email protected]"
112 Lobe Center
Valve Lash
Intake - .010
Exhaust - .012