The Ford Barn - View Single Post

19Fordy · 09-12-2018, 05:19 PM

Is that portion of the drive shaft case hardened? Run a smooth file across it to see.
If it is not case hardened do you think it would be k to MIG weld the pits, file them smooth and run it with the bearing. This is pure speculation. Just an idea.

09-12-2018, 05:19 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,942	Re: Driveshaft Repair Is that portion of the drive shaft case hardened? Run a smooth file across it to see. If it is not case hardened do you think it would be k to MIG weld the pits, file them smooth and run it with the bearing. This is pure speculation. Just an idea.