View Single Post
Old 08-29-2013, 12:51 PM   #5
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,769
Default Re: Help! - pitman arm on 34pu needs moved counterclockwise

The steering box needs to be centered so it steers without slop. The boxes have slop when off center. I would get the box centered so it is tight and then figure out what to change. You should be able to find or make an adjustable drag link to fix the problem. Is everything a modified system? Has the shaft been welded on? It may need to be redone to center the wheel. The keyed shafts have a specific orintation so the wheel will be centered.
Andy is offline   Reply With Quote