The Ford Barn - View Single Post

estout81 · 12-08-2014, 10:36 AM

Bruce,
If the Lincoln gauges are the same as the Ford gauges then you can use a ECH IR1 from NAPA. That is what Ford did when they changed to 12v. Did this on my '48 F-1 when I changed to 12v. Put in series between switch and gauges.

12-08-2014, 10:36 AM	#234
estout81 BANNED Join Date: Jun 2010 Location: Utica, Ohio Posts: 522	Re: Yes, they are still out there NUMBER 2 Bruce, If the Lincoln gauges are the same as the Ford gauges then you can use a ECH IR1 from NAPA. That is what Ford did when they changed to 12v. Did this on my '48 F-1 when I changed to 12v. Put in series between switch and gauges.