[Bruce in southern OH]

Took gas tank and gas fill tube to local radiator shop, told would be about a week. They are going to place tank in a large tank and soak, remove and place in a hot bath of un know material then dry. After drying they will apply red coating material, will have to cure for 48 hours, told cost is going to be $150.00. POR products alone would be 50 plus dollars, I have found that the material for coating takes about double amount they suggest. I have even cut tanks open, sand blasted and then painted and it uses every bit of product and that is wiping can out bare. Good thing about radiator shop coating inside of tank is that they almost flood tank and that helps coat the back side of the baffles. Will post photos of tank and tube as soon as I receive back.