View Single Post
Old 11-19-2019, 10:24 AM   #9
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 1,478
Default Re: Need Help With A 1932 Ford Part

Quote:
Originally Posted by Bored&Stroked View Post
Just to ask a dumb question - if it wasn't threaded, then how did they install it in the dash?
I would imagine they are all threaded for that obvious reason, however The can be a bear to remove.

My memory finally came back enough for me to remember what I did... The one I had that would not come off for anything; I used a dremel with a very thin/small cutting wheel and sliced the knob inner portion that was stuck on each side and with a twist of a screwdriver it came off. Granted it did cut a groove into the threads in two places, but they were plenty enough left to serve it's purpose of simply attaching a knob.
35fordtn is online now   Reply With Quote