[mrfliboy]

Trying my luck at bondo.

3 coats high build primer, blocked with 80.

First attempt at filler, too hot and got hard quick, ended up scraping it all off.

Second attempt much more useable, small area but looks more like it should.

Blocked with 80 and than marked all my areas needing filler.

Laid some more filler, blocked it with 80 on a air board sander.

150 fpm air movement across fender, perfect.

2 coats high build primer, drying now for the night.

A few flaws but hey its a 75 year old truck.