Thread: No Spark
View Single Post
Old 04-02-2021, 04:36 PM   #4
Benson
Senior Member
 
Benson's Avatar
 
Join Date: May 2010
Posts: 2,600
Default Re: No Spark

Things about Electronic (FSI) Ignitions

1. If you leave the key ON for 30 seconds without engine running, the module will burn up.

2. The installation REQUIRES a continuous ground wire to be run back to the battery post - no "short cuts".

3. Reversing polarity of battery will burn out either a 6 or 12 volt module.

4. Hooking 12 volts to a 6 volt module will burn it out.

5 If engine is running and you remove a wire from a spark plug AND the spark inside the distributor happens to jump to the module it can be burned up.

Last edited by Benson; 04-02-2021 at 04:42 PM.
Benson is offline   Reply With Quote