The Ford Barn - View Single Post

jimTN · 11-23-2020, 08:14 AM

Yes, you can remove the screw that holds end of your cyl. that will release the top from hydraulics. Another very important thing on 46-8 conv. is to always unsnap the buttons on both rear sides before lowering the top or damage will occur to the top material.

11-23-2020, 08:14 AM	#10
jimTN Senior Member Join Date: May 2010 Location: Powell, TN Posts: 2,509	Re: ‘46 Convertible top not working Yes, you can remove the screw that holds end of your cyl. that will release the top from hydraulics. Another very important thing on 46-8 conv. is to always unsnap the buttons on both rear sides before lowering the top or damage will occur to the top material.