View Single Post
Old 02-09-2019, 01:35 PM   #5
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
Default Re: 1933 Ford Front Spring Perch -Original

Depending on how the originals are worn, they can sometimes be repaired by building up with weld and remachining back to stock dimensions. I have done it myself a couple of times, including a repair to a damaged end to the threaded portion. If the pin area is worn there is a fair chance the hole in the axle is also wallowed out oversize too. same for the tapered parts of the wishbone. All can get worn by loose pins and all can be effectively repaired given the right skills and equipment.

Mart.
Mart is offline   Reply With Quote