Sponsored Links (Register now to hide all advertisements)
Mine is a Signal Stat also, running on 6 volts. The pilot light is on the stalk. When I wired it correctly using the P spade from the flasher, the light is off when it should be, and flashes when it should. However, when i added a beeper which requires very little juice to the the same P circuit, it beeped constantly in the off position of the stalk. So juice is running thru all of the time, although not enough to light the light.
To solve the problem, i wired the beeper, and signal light into a left and right outside flasher wire, using 2 diodes so the juice wouldn't cross over. It works, but it's kind of annoying to have all of the extra connections. If anyone knows a simpler way, I'd like to hear about it.