The Ford Barn - View Single Post

Tinker · 10-01-2018, 07:42 PM

I like to buy spark plug wires in bulk. About 14ft gets you there, with a couple ft left over. Run the wires run through the loom and connected to the distributor plates (everything tight) Leave 6" long to spark plugs and then make the ends up tight when everything is bolted up. Makes it nice and clean.

.

10-01-2018, 07:42 PM	#7
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: plug wire routing I like to buy spark plug wires in bulk. About 14ft gets you there, with a couple ft left over. Run the wires run through the loom and connected to the distributor plates (everything tight) Leave 6" long to spark plugs and then make the ends up tight when everything is bolted up. Makes it nice and clean. . Last edited by Tinker; 10-01-2018 at 09:35 PM.