The Ford Barn - View Single Post

DavidG · 05-21-2018, 09:05 PM

The '33 and up version of the end plate with tube attached works well. To avoid leaks at the end of the sector housing you need a grease seal installed which requires machining of the opening on the outer end of the sector housing. A big enough O ring may work as well. And there's the need for a thick-enough cork gasket between the sector housing and the steering box.

05-21-2018, 09:05 PM	#2
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,102	Re: 1932 Ford Steering box leak The '33 and up version of the end plate with tube attached works well. To avoid leaks at the end of the sector housing you need a grease seal installed which requires machining of the opening on the outer end of the sector housing. A big enough O ring may work as well. And there's the need for a thick-enough cork gasket between the sector housing and the steering box.