The Ford Barn - View Single Post

miker98038 · 11-05-2020, 07:41 PM

Kultulz, I've never had a factory PCV valley pan. All mine were either custom conversions or aluminum covers I built. With baffles underneath for oil control. So I really didn't know what I had there. The valley pan was used for a mock up on an induction system, so I never ran it. It did come apart so hopefully he can find a valve that works for him with whatever set up he uses.

11-05-2020, 07:41 PM	#32
miker98038 Senior Member Join Date: Mar 2013 Location: Kent, WA. Tucson, AZ Posts: 1,398	Re: Affordable pcv addon? Kultulz, I've never had a factory PCV valley pan. All mine were either custom conversions or aluminum covers I built. With baffles underneath for oil control. So I really didn't know what I had there. The valley pan was used for a mock up on an induction system, so I never ran it. It did come apart so hopefully he can find a valve that works for him with whatever set up he uses.