New transmission locks up. Only spins free in neutral. Thoughts?
OK, I got the transmission assembled, double check tooth count, back lash, etc. Everything fits perfectly, but the trans locks up in forward and reverse. Only free spins when the lower/reverse slider is located in neutral (first pict on the far left).
I've read Mac VP's and Max Navarro's books. I still can't figure out the problem.
The sychro hub/sleeve is very hard to move back or forward. I've placed the top on it to move the synchro fore and aft and it still locks up the trans.
Any help or tips would be appreciate. Thanks.
Tim
Last edited by Tim Ayers; 08-25-2019 at 12:06 AM.
|