The Ford Barn - View Single Post

marty in Ohio · 03-06-2019, 08:23 AM

All of these Barners are giving you the straight story. I was afraid that I would mar the rims with tire irons, so I made some out of hardwood. I use Murphy's Oil Soap as a lubricant and I do them on my basement floor so the temperature is no problem. Give it a try.
Marty

03-06-2019, 08:23 AM	#12
marty in Ohio Senior Member Join Date: May 2011 Location: Elyria, Ohio Posts: 756	Re: Tire changers, do you use the DIY units? All of these Barners are giving you the straight story. I was afraid that I would mar the rims with tire irons, so I made some out of hardwood. I use Murphy's Oil Soap as a lubricant and I do them on my basement floor so the temperature is no problem. Give it a try. Marty