The Ford Barn - View Single Post

ford35lh · 12-13-2018, 12:35 PM

The top one is 3/4 diameter with fatter ends which has the 13/16 hex
and 11/16 square holes on the ends.

The second one down has a 3/4 hex hole but everything else is the
same as the third down

The third one is ,I believe, B 17036-C, as the crank socket is 2 7/8 long.

The bottom wrench in the photo is,I believe, 68-17035; short lived.

Any help to identify would be appreciated.

12-13-2018, 12:35 PM	#1
ford35lh Senior Member Join Date: May 2010 Location: Upstate; The Real New York Posts: 444	Lug wrench/crank handle ID The top one is 3/4 diameter with fatter ends which has the 13/16 hex and 11/16 square holes on the ends. The second one down has a 3/4 hex hole but everything else is the same as the third down The third one is ,I believe, B 17036-C, as the crank socket is 2 7/8 long. The bottom wrench in the photo is,I believe, 68-17035; short lived. Any help to identify would be appreciated.