Thread: How much toe?
View Single Post
Old 09-10-2013, 04:30 PM   #7
Model A Bill
Member
 
Join Date: Nov 2011
Location: Wilmington New York
Posts: 94
Default Re: How much toe?

When I did mine,I clamped a straight solid piece of metal stock to the face of the drum.I kept it level with the floor.The metal was long enough to extend past the front of the frame in the front and slightly longer then the face of the drum in the rear to aid in measuring.Take a measurement at the back of the metal and then measure the front.Adjust as necessary to maintain1/16 to 1/8 less distance at the front.Crude but it worked fine for me.I took it to the garage where I work and checked it with the alignment equipment and it was spot on.Others may chime in with a better way

Bill
Model A Bill is offline   Reply With Quote