The Ford Barn - View Single Post

Tom Wesenberg · 06-15-2019, 08:23 PM

"The water jackets looks pretty clean, no blocked ports so I should be OK there."

I've never seen blocked ports, but a lot of rusty crud settles in the rear bottom of the cooling chamber. Dig around with an old cable or some such, then blow out the junk.

06-15-2019, 08:23 PM	#11
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Best way to scuff a clean head "The water jackets looks pretty clean, no blocked ports so I should be OK there." I've never seen blocked ports, but a lot of rusty crud settles in the rear bottom of the cooling chamber. Dig around with an old cable or some such, then blow out the junk.