Thread: bleeding brakes
View Single Post
Old 09-11-2019, 07:23 PM   #12
1948F-1Pickup
Senior Member
 
1948F-1Pickup's Avatar
 
Join Date: Oct 2015
Location: Socal
Posts: 794
Default Re: bleeding brakes

I'm thinking..... just like Mart says, pressure bleed it.
Couldn't be too hard to tap a small hose nipple into the
master cylinder cap and put about 10 psi of air to it.
(Just don't let the master cylinder run dry) Replace the
fitting with a plug when you're done.
1948F-1Pickup is offline   Reply With Quote