Thread: 8RT Oil Pan and starter plater
View Single Post
Old 03-11-2020, 11:45 PM   #2
Ross F-1
Senior Member
 
Ross F-1's Avatar
 
Join Date: Nov 2010
Location: NM
Posts: 2,438
Default Re: 8RT Oil Pan and starter plater
It does bolt up into the block. The 2 long bolts replace the 2 normal pan bolts straddling the rear seal. 6410 is NLA, as far as I know, but the rubber seals that it carries (to shield the short section of crank behind the seal in the pan) are available, I think from Mac VP.
Attached Images
File Type: jpg Dust Shield-1.jpg (42.1 KB, 39 views)
File Type: jpg Dust Shield-2.jpg (43.3 KB, 34 views)
File Type: jpg Dust shield.JPG (64.1 KB, 59 views)
__________________
'52 F-1, EAB flathead
Ross F-1 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)