View Single Post
Old 06-26-2017, 09:38 AM   #14
P.S.
Senior Member
 
Join Date: Jul 2012
Location: California
Posts: 1,699
Default Re: Mitchell Overdrive Question

Quote:
Originally Posted by inex01 View Post
Thank you so very much for the feedback, have the 16s getting powder coated so will give them a try, then if it is still struggling will change out the rear, my engine has the 5.4 heads and is balanced, not really potent so most likely will not work well with just the 16s, I screwed up!
With a stronger motor, you will be just fine. Enjoy!!
P.S. is offline   Reply With Quote