View Single Post
Old 09-10-2013, 10:03 AM   #3
Junior Member
Join Date: Jan 2012
Posts: 24
Default Re: Help needed, tail light wiring harness- 53 Victoria


Thanks for your reply. To answer your questions;
- this car has all original wiring.
- turn signals are not working.

We converted it to 12v. I'm going to buy a 12v brake stop light switch & turn signal flasher, provided ones for a 56 Ford (12v) will work in our 53.

You mention a cross over wire that runs to the passenger side and plugs into the dual female bullet connector there. Would that be the thick white wire at the drivers side that has been cut and is hanging free without a home ?

Will do what you've suggested tonite and see what we find out.

thanks again-
53vicki is offline   Reply With Quote