View Single Post
Old 08-23-2019, 10:55 AM   #12
Benson
Senior Member
 
Join Date: May 2010
Posts: 1,868
Default Re: Buyer beware on another repro part

The purpose of specifying the shoulder screw in the first place is so that the screw bottoms out BEFORE it can be tightened too much to bend the cover and/or short out.

The correct screw is not a simple big box screw without a shoulder.

Last edited by Benson; 08-23-2019 at 11:29 AM.
Benson is offline   Reply With Quote