View Single Post
Old 08-23-2019, 05:16 AM   #8
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 475
Default Re: Buyer beware on another repro part

Quote:
Originally Posted by SteveB31 View Post
Not all vendors sell the wrong screw for that application. We sell the right one and have for 40 years. Also, keep in mind many horn covers have had that screw tightened too much in the past pulling the horn motor cover in a bit making even the correct screw appear too short and cause it to short out the brush. Make sure your motor cover is flat and not pulled in around that screw.

Steve @ Bert’s
Good point Steve, and I believe the part in question came from Brattons. The Horn motor cover was not the problem, but I can see people tightening it way too tight like they need a seal.
__________________
"The more things change, the more they stay the same."

Last edited by chrs1961815; 08-23-2019 at 05:17 AM. Reason: Error
chrs1961815 is online now   Reply With Quote