The Ford Barn - View Single Post

DavidG · 07-07-2019, 11:51 AM

That's pretty well covered at the bottom of the page. You'll need the part number, which is B-35328-B or if you want all versions, just use B-35328. In your communication with the BFRC do not confuse the issue by continuing to use the term "firewall" as that was not in Ford's vocabulary at that time. The part name they used was "dash".

You may ending up needing Staples or the like as the drawing may be full size and very likely no less than 1/2 size. I do not believe that the BFRC has the capability to produce a paper copy of that size.

07-07-2019, 11:51 AM	#11
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,093	Re: 1932 Firewall Blueprints That's pretty well covered at the bottom of the page. You'll need the part number, which is B-35328-B or if you want all versions, just use B-35328. In your communication with the BFRC do not confuse the issue by continuing to use the term "firewall" as that was not in Ford's vocabulary at that time. The part name they used was "dash". You may ending up needing Staples or the like as the drawing may be full size and very likely no less than 1/2 size. I do not believe that the BFRC has the capability to produce a paper copy of that size.