The Ford Barn - View Single Post

RalphM · 04-23-2019, 04:45 PM

Local steel supply doesn’t have anything thinner than .062, but I called a place that makes roofing and gutters and they say they have some cold rolled at 18 gauge. Have to get over there and look at it to see if it’s the right stuff. Neither one of them knew what AKDQ steel was.

04-23-2019, 04:45 PM	#9
RalphM Senior Member Join Date: Nov 2015 Location: North Pole, Alaska Posts: 2,651	Re: 35 floor thickness? Local steel supply doesn’t have anything thinner than .062, but I called a place that makes roofing and gutters and they say they have some cold rolled at 18 gauge. Have to get over there and look at it to see if it’s the right stuff. Neither one of them knew what AKDQ steel was.