Re: Yes, they are still out there NUMBER 2
Some photos of the TO bearing, clutch release arm, and any other questionable parts would be good. You want to adjust the linkage so the clutch pedal (while sitting on it's bumper) has about 1" of movement before the TO touches the fingers on the PP. Small movement of the linkage should result in a bit of movement to the TO. So 1/2" of space between the TO and PP fingers does not sound too unreasonable. You may want to check embossed part numbers on some of the parts with a part book. If Mac has a second transmission in the shop maybe he can comparer the two arms by photo and dimensions
Last edited by Terry,OH; 09-20-2014 at 08:34 AM.
|