Quote:
Originally Posted by Royce P
I pack it with grease.
|
Royce, I was re reading your first posts and I had a question.
One time recently I could not get my t to start and later after some discussion I realized that I had "over oiled" the commutator. I had to clean it up and put some light oil on the surfaces and put it back together and it ran fine. I was using 80wt trying to achieve something similar to what you have done with grease. So with the grease option if you pack it full of this red grease I assume the the roller pushes things around so that it makes contact anyway. Do I understand this correctly?
Got any photos of how your unit looks when doing this operation?
When it gets hot I am guessing the red grease stays mostly in tact and does not leak all over under the engine?
We use some red grease on semi truck chassis, I am wondering if they are similar to each other.
thanks,
Mark