The Ford Barn - View Single Post

Brian · 06-13-2013, 09:42 PM

Has it been modified for full flow filtration?; this involves putting a plug in oil gallery at rear of engine. If so modified, you'll need to either remove said plug, or plumb in the exterior lines etc to suit.

06-13-2013, 09:42 PM	#3
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,834	Re: Dry rod bearings Has it been modified for full flow filtration?; this involves putting a plug in oil gallery at rear of engine. If so modified, you'll need to either remove said plug, or plumb in the exterior lines etc to suit.