[Bill G]

I initially did what everyone else did and commented about top wood. I did not do body wood, but I do know that the rear window wood is all held in by nails, so you have to remove the rear window and somehow lift the nails out I don't suspect that would be an easy task. The vertical piece behind the rear quarter window is also held in by a screw that is covered by the body sheet metal, so that would probably be a real chore to get out. Vertical pieces in the B pillar may be the same. When it comes to fit, the kit suppliers intentionally over-size to accommodate all possibilities of body variances out there. I think if you do a bunch of searches on this and the other Model A forum, you will find pieces of information.