View Single Post
Old 07-12-2019, 03:33 PM   #4
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
Thumbs up Re: Heater temperature control valve 302 engine

Quote:
Originally Posted by 50fordcoupeman View Post

So the valve should go into the pressure side right? If this is the case then the NAPA guy was right because my valve is currently in the water pump hose. This would put hot water into the heater core all the time regardless if the valve is open or closed.
Correct. If it is @ the WP return, the HTR CORE will not see constant hot coolant but just enough to make it uncomfortable in the summer.
__________________
*****

We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ...
KULTULZ is offline   Reply With Quote