[JCAllison]

Originally Posted by KULTULZ

https://www.repairconnector.com/prod...-Pigtail-.html

Hey Mr. K., what is the Pin that fits into the Stud Socket called.

Am seriously considering going to a Mechanical Brake Light Switch. Tried to insert a URL, but couldn't get it to show up in a Preview. It is for a Borg Warner S237 Brake Light Switch. If the URL doesn't come up in the post, you could google what is above in BOLD type to see the part.

(Just as I feared, the URL didn't come up!)

This Borg Warner S237 Brake Light Switch is what was in Lorrie. I think that it is around here somewhere, but if it isn't or can't be found, could have one here next week.

Making a bracket for it would be simple. Maybe mount it on the Steering Column with some Hose Clamps.

The reason that I need to know what the Male Stud Socket Pin is called is because I would like to connect them to the existing Female Stud Sockets that fit the Pins on the Hydraulic Brake Light Switch. That way, if it is ever decided to go back to the Hydraulic Brake Light Switch, all that would have to be done is remove the Pins from the Female Spade Connectors and put the Stud Sockets on the Hydraulic Brake Light Switch.

Already have the Female Spade Connectors to fit the BW S237, but need the Pin Fittings to go into the existing Female Stud Sockets.

Can you help me out here?

Thanks in advance. Take care.

JCAllison