View Single Post
Old 07-08-2020, 07:36 AM   #4
rottenron36
Senior Member
 
rottenron36's Avatar
 
Join Date: May 2012
Location: Corbett OR
Posts: 233
Default Re: cam install, won't turn all the way! help again please

The crank, rods, and pistons are in. The flywheel, clutch and pressure plate are all in. That is why i took off the timing gear so i could turn the cam. Does the cam have a specific way to go in oil pump gear? Will be looking at everything again today. Thanks Ron
rottenron36 is offline   Reply With Quote