The Ford Barn - View Single Post

Mike Peters · 03-22-2020, 10:55 AM

It's also easier to install to drop the engine back in the frame with the accelerator linkage bracket removed from the flywheel housing. The accelerator pedal can easily get tangled with the firewall when sliding the engine in. It's not hard to slide the accelerator bracket back in after the engine is bolted back in place.

03-22-2020, 10:55 AM	#3
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: Installing engine/tranny w/ pedals It's also easier to install to drop the engine back in the frame with the accelerator linkage bracket removed from the flywheel housing. The accelerator pedal can easily get tangled with the firewall when sliding the engine in. It's not hard to slide the accelerator bracket back in after the engine is bolted back in place.