View Single Post
Old 03-12-2018, 07:14 PM   #19
Larry Jenkins
BANNED
 
Join Date: Feb 2015
Location: East Central Iowa
Posts: 1,275
Default Re: Removing caked on grease and crud

Scrape off the excess with a chisel. Then, using good rubber gloves, apply some methylene chloride (paint remover.) Let set, then scrape again with a chisel and some coarse steel wool. Wipe clean with Mineral Spirits to remove residual oils. Gets you down to sanding prior to priming and paint.
__________________
Good enough.. Isn't.
Larry Jenkins is offline   Reply With Quote