Quote:
Originally Posted by 61Klassic
Hi. I’m in the process of grinding my valve seats to set the lash as I have non adjustable lifters. Due to the fact the valves aren’t at 90 degrees to the deck, my cutting tool is creating a larger valve seat contact area towards the piston as it is obviously contacting this area first.
Could anyone advise if this is correct or what I need to do to rectify the issue.
Thanks in advance for any help
Kev
|
Kev
So you are grinding the seats to set the tappet clearance? If the seats are good why not butt grind the valve stems?
Maybe I am missing something which is common for me.
John