View Single Post
Old 12-03-2014, 03:30 PM   #103
FrankWest
Senior Member
 
FrankWest's Avatar
 
Join Date: Sep 2013
Posts: 3,001
Default Re: 1933 can't start after recent restart

Quote:
Originally Posted by Pat/Ohio View Post
Frank,

Look at the picture that DavidG posted above, now read his post. He has clearly pointed out what you should do next. Remove the timing gear inspection cover (2 bolts shown in the picture and one under the cover that goes through the oil pan). After removing the 3 bolts and timing gear inspections cover, you can now crank the engine over a few spins and check the teeth on the timing gear. Very straight-forward procedure. Good luck!
will do!
sounds like the best plan.
FrankWest is offline   Reply With Quote