View Single Post
Old 06-12-2019, 11:01 AM   #6
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 4,441
Default Re: In search of Stainless Steel hardware.

Unless you put lock washers under the bolt head, there should be enough sealing between them and the axle housing that even a small amount of sealer should take care of leaks. Also as was said above, these are not standard fine thread. I use the white thread lock on the bolts and anaerobic sealer between the gaskets and housing.

https://www.zoro.com/permatex-anaero...UaApIYEALw_wcB
may be over kill but that is how I do it.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote